Cement from Märker is continuously refined and adjusted to meet the respective requirements and challenges of modern construction and allways adheres to the official standards.
The product range comprises:
I Portland cements (CEM I)
I Portland slag cements and Portland composit cements (CEM II)
I Blust furnace cements (CEM III)
"Cement for special applications"
I Road paving cement
I Blast furnace cement with high sulfate resistance
I Cement for high-early strength concrete elements
I Rapid hardening hydraulic binder
Cement products from Märker are sold by its production / delivery plants Harburg (Bavaria) and Lauffen (Baden-Wuerttemberg).
Click on the list boxes below to get more information regarding:
Technical data sheet, Material safety data sheet,
Certificate of conformity, Declaration of performance.
Concrete,
reinforced and prestressed concrete
according to EN 206-1 / DIN 1045-2
Prestressed concrete (DIN 1045-1)
Concrete constructions (ZTV-Ing (1) )
Concrete products, precast concrete elements
Industrial floor
Recommended compressive strength:
≥ C 30/37
High early strength
Standard hardening
High level of
hydration heat development
Concrete,
reinforced and prestressed concrete
according to EN 206-1 / DIN 1045-2
Prestressed concrete (DIN 1045-1)
Concrete constructions (ZTV-Ing (1) )
Concrete products,
precast concrete elements
Industrial floor
Recommended compressive strength:
≥ C 30/37
High early strength
Standard hardening
High level of
hydration heat development
Concrete,
reinforced and prestressed concrete
according to EN 206-1 / DIN 1045-2
Prestressed concrete (1045-1)
Concrete constructions (ZTV-Ing (1) )
Precast concrete elements
Recommended compressive strength:
≥ C 30/37
Very high early strength
Very high level of
hydration heat development
Minor hardening
Wet shotcrete according to DIN 18551 / EN 14487-1
Concrete,
reinforced and prestressed concrete
according to EN 206-1 / DIN 1045-2
Prestressed concrete (DIN 1045-1)
Concrete constructions (ZTV-Ing (1) )
High-early strength concretes
Precast concrete elements
Recommended compressive strength:
≥ C 30/37
.
.
Maximal early strength
Very high level of
hydration heat development
Minor hardening
.
.
(1) ZTV-ING: Additional technical terms of contract and guidelines for civil engineering works (German designation: ZTV-ING)
Concrete,
reinforced and prestressed concrete
according to EN 206-1 / DIN 1045-2
Prestressed concrete (DIN 1045-1)
Concrete constructions (ZTV-Ing (1) )
Screed, industrial floor
Recommended compressive strength:
C8/10 to C 30/37
Standard early strength
Standard level of
hydration heat development
Standard hardening
Concrete,
reinforced and prestressed concrete
according to EN 206-1 / DIN 1045-2
Concrete constructions (ZTV-Ing (1)
Screed, industrial floor
Recommended compressive strength:
C8/10 to C 30/37
Standard early strength
Standard level of
hydration heat development
Standard hardening
Beton, Stahlbeton und Spannbeton nach DIN EN 206-1/DIN 1045-2
Spannbeton nach DIN 1045-1
Betonfertigteile
empfohlene Druckfestigkeit: ≥ C 30/37
Sehr hohe Frühfestigkeit
Geringere Nacherhärtung
Hohe Hydratationswärmeentwicklung
Concrete,
reinforced and prestressed concrete
according to EN 206-1 / DIN 1045-2
Prestressed concrete (DIN 1045-1)
Concrete constructions (ZTV-Ing (1) )
Industrial floor, precast concrete elements
Recommended compressive strength:
≥ C 30/37
High early strength
High level of
hydration heat development
Standard hardening
Concrete,
reinforced and prestressed concrete
according to EN 206-1 / DIN 1045-2
Prestressed concrete (DIN 1045-1)
Concrete constructions (ZTV-Ing (1) )
Industrial floor
Recommended compressive strength:
≥ C 30/37
Standard early strength
Standard level of
hydration heat development
Good hardening
(1) ZTV-ING: Additional technical terms of contract and guidelines for civil engineering works (German designation: ZTV-ING)
Concrete,
reinforced and prestressed concrete
according to EN 206-1 / DIN 1045-2
Prestressed concrete (DIN 1045-1)
Hydraulic / civil / foundation engineering
(Drill-foundation piles according to EN 1536
technical report DIN 129)
Concrete for
massive structural components
Recommended compressive strength:
C8/C10 to C 30/37
Low level of
hydration heat development
Slow strength development
Good hardening
Concrete,
reinforced and prestressed concrete
according to EN 206-1 / DIN 1045-2
Prestressed concrete (DIN 1045-1)
Concrete for
massive structural components
Recommended compressive strength:
≥ C 30/37
Standard early strength
Standard level of
hydration heat development
Good hardening
Concrete,
reinforced and prestressed concrete
according to EN 206-1 / DIN 1045-2
Prestressed concrete (DIN 1045-1)
Sulphate attack on concrete caused by
soil and groundwater
Concrete for
massive structural components
Recommended compressive strength:
C8/C10 to C 30/37
Low level of
hydration heat development
Slow strength development
Cement with high
sulfate resistance
Good hardening
(1) ZTV-ING: Additional technical terms of contract and guidelines for civil engineering works (German designation: ZTV-ING)
Cement for the production of concrete road
pavements according to ZTV Beton – StB (2)
Concrete,
reinforced and prestressed concrete
according to EN 206-1 / DIN 1045-2
Recommended compressive strength:
C8/10 to C 30/37
Standard early strength
Standard hardening
High level of
hydration heat development
Cement with effective
low alkali content
Amelioration / Stabilization
Increase of load bearing capacity
High resistance to stresses
caused by traffic circulation
Base layers
Bound base layers
Qualified soil improvement
Subsoil stabilization
Subgrade stabilization
(1) ZTV-ING: Additional technical terms of contract and guidelines for civil engineering works (German designation: ZTV-ING)
(2) ZTV Beton - StB: Additional technical terms of contract and guidelines for the construction of base courses
with hydraulic binders and concrete surfacing (German designation: ZTV-Beton - StB)
Road surfacing cement has become an important component of our product line.
It was developped by Märker specifically for long-lasting road pavements with Na2O equivalent of <0,8.
Furthermore, Märker is an expert in producing Suevit trass cement.
The swabian trass, also called Suevit, is a native rock generated by meteorite impact. It is especially suitable for restauration work
and also serves as a constituent for construction work with any type of natural stone.
Efflorescence and discoloration are considerably reduced.
The Märker product range covers the classic application areas for cement. Märker's assortment includes all relevent blends and mixtures available on the cement market today. Märker is therefore well-positioned as your reliable partner to deliver supplies to customers located in Bavaria and Baden-Wuertemberg.
The Märker brand is known and valued by designers and project sponsers for its reliability, quality and stable value. Märker is certified in accordance with EN ISO 9001. The integrated quality assurance system ensures the same high quality level at every step of the production process. Märker's energy management system - in accordance with EN ISO 50001 - guarantees the careful use of of our environmental ressources.